Installing a shower enclosure in a wet room can be intimidating, but it doesn’t have to be. With the right supplies and expertise, you can easily fit your own wet room shower enclosure and give your bathroom an updated look.

This guide will walk you through the process of fitting a shower enclosure in a wet room step-by-step so that you can get the job done quickly and easily.

From measuring for size to installing fixtures, we’ll cover everything you need to know about how to fit your new Wetroomstop shower enclosure safely and properly.

Measure The Area Of Your Shower Enclosure

The first step in fitting a shower enclosure is to measure the area you plan on installing it in. This will give you an idea of what size enclosure you’ll need and help you determine where the fixtures should be placed.

Take your measurements down to the nearest centimeter, and make sure that all corners are 90 degrees. If any of the walls or corners are not at 90 degrees, you may need to adjust the measurements accordingly.

You will also need to measure the height of your ceiling and any pipes that may be in the way. This information is important for ensuring that your enclosure fits correctly in your wet room.

Choose a suitable style and size of the shower enclosure

Once you have taken your measurements, it’s time to choose a suitable style and size of shower enclosure for your wet room.

If you are fitting your enclosure in a larger space, consider an open sided or semi-frameless design that can help create the illusion of a larger area in the bathroom. Alternatively, if the space is smaller, opt for a fully framed shower enclosure as this will create a sense of privacy while still allowing light to pass through.

If you’re using a wet room shower tray, make sure that your chosen enclosure fits around the tray, whether its a square or linear shower drain.

Prepare the wet room space by waterproofing it with a membrane

Before you install your shower enclosure, you need to prepare the wet room space by waterproofing it with a membrane. This will help protect the walls and floor from water damage and keep the area around your enclosure dry.

You should always use a membrane that is specifically designed for wet rooms as this will ensure maximum protection from moisture.

Here at Wetroomstop, we can provide a complete range of waterproofing kits, in addition to complete wet room kits to ensure your space is fully protected.

Install the frame of the shower enclosure

Once you have waterproofed your space, it’s time to install the frame of the shower enclosure. Make sure that all pieces are securely fitted before moving on to the next step. Installing the frame should be a fairly simple job, particularly if you're using one of our specialist wet room kits.

To install the frame of your shower enclosure, start by attaching the wall brackets to the studs in your walls.

Then secure the frame using screws and bolts, ensuring that each piece is firmly secured before moving on to the next section.

Finally, check all fixtures for stability and make sure that everything is correctly fitted before unboxing your enclosure.

Add in any fixtures or accessories you may need such as handles and towel rails

Once the frame is secured in place, it’s time to add in any fixtures or accessories you may need. This might include handles, towel rails, shelves, and more.

When choosing your accessories, make sure that they are compatible with the enclosure you have chosen and that they are suitable for wet rooms.

For example, you may need to choose corrosion resistant fixtures so that they can withstand the moisture in your wet room.

Fit the glass panels to complete your new look

When all the fixtures are in place, it’s time to fit the glass panels. This is a fairly simple job and shouldn’t take too long.

Ensure that each panel is correctly fitted before securing them in place with screws and bolts. You may also need to use silicone or sealant around the edges to create a watertight seal.

Once the glass panels are fitted, check all fixtures once again and make sure that everything is where it should be.

Seal any gaps between tiles and walls for extra protection against water damage

The last step is to seal any gaps between tiles and walls for extra protection against water damage. This can be done with a silicone sealant or tape that is specifically designed for wet rooms.

Apply the sealant carefully around the edges of your enclosure, ensuring that it completely covers all gaps and corners.

Once sealed, you’re ready to step back and enjoy the fresh look of your new shower enclosure!

Test out your new setup before using it regularly

Before you start using your shower enclosure, it’s important to test it out first. This will ensure that everything is working correctly and that no water is getting into any areas of the wet room.

Turn on the water and check for any leaks or drips around the edges of the enclosure. If you find any, make sure to fix them before using the shower enclosure on a regular basis.

And that’s it – congratulations, you have successfully installed your new wet room shower enclosure! With the right preparation and careful installation, you can be sure that your new setup will stand up to regular use for years to come!

Browse Wetroomstop's Diverse Range of Wet Room Shower Enclosures Today

Here at Wetroomstop, we can provide a complete range of wet room shower enclosures in different sizes and styles. Whether you’re looking for a modern frameless option or a more traditional framed design, we have something to suit every budget and design taste.

Browse our selection of wet room shower enclosures today to find the perfect fit for your home.