Home

The 800 mm x 800 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower really small space. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Sharp point, zinc plated drywall screws used for fixing cement board to walls and/or floors.

Available in a variety of lengths from 25mm to 75mm long.

Cement coated building boards are used for creating a waterproof surface suitable for fixing wall and floor tiles to. Thanks to them you can level out old concrete or wooden subfloors in your bathroom. They are commonly used in showers, steam rooms, and swimming pools etc.

Works great with our shower trays. These 10mm panels can be screwed directly to studs to create a wall that is resistant to water penetration and mould. They can also be used to match the thickness of your subfloor to create the perfect barrier free wetroom floor.

Cement coated building boards are used for creating a waterproof surface suitable for fixing wall and floor tiles to. Thanks to them you can level out old concrete or wooden subfloors in your bathroom. They are commonly used in showers, steam rooms, and swimming pools etc.

Works great with our shower trays. These 6mm panels can be used to match the thickness of your subfloor to create the perfect barrier free wetroom floor.

Used for fixing cement boards to masonry walls or tiled surfaces.

Ideal for use in wet areas. Available in a variety of lengths.

The 900 mm x 900 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 900 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 900 mm x 900 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 1000 mm x 1000 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 1200 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

For use in conjunction with fixing screws to secure cement boards to walls and/or floors.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

The 900 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 1000 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The new linear clamp down vinyl floor drain is the latest addition to our collection. Its sleek design combines functionality and aesthetics to bring you a one of a kind floor drain. The clamped down frame creates a watertight seal without putting too much stress on the floor covering extending its longevity.

The brushed steel finished covers (your choice of 3 styles) create a clean look that is both practical and sturdy. It is made of high grade stainless steel that is resistant to scratches or dents. The cover is easily removable for cleaning and maintenance using the key provided.

The drain also includes with it the McAlpine HC26 50mm. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The internal corner is a prefabricated insert that makes sealing the corners of your shower or wet room quick and easy. Glued in place with the PCI lastogum it ensures that all internal corners are sealed correctly.

Although you will find two of these in the standard Wetroomstop Sealing Set, you may need more. These can be purchased individually.

Delivered sealing corner will be exactly as per picture. It is internal for the wall.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 900 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 1000 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.