Home

The 1000 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 900 mm x 1400 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The 800 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The Microcement Linear shower drain series is meticulously engineered for compatibility with microcement, resin, and similar floor coverings. Featuring an adjustable frame and drain cover offering adjustment from 3 to 12 mm, it accommodates a wide range of materials seamlessly. Available in various variants, the drain suits a variety of shower sizes and designs. Equipped with a secondary drainage system, it efficiently drains water seeping through the surface finish to the insulation layer. Additional features include multiple fittings colours, painted using the PVD method, ensuring durability and longevity. Choose from brushed, polished, or matte finishing options for the drain surface, along with seven available drain cover styles to suit your aesthetic preferences. Each supplied set includes a waste trap, sealing membrane, and adjustable legs. Select the ideal waste trap based on flow rate requirements and available space, while the sealing membrane ensures waterproofing of the joint between the floor and drain. The optional detachable legs facilitate easy installation on concrete floors by levelling the drain. As a standard product in our range, we prioritise stocking with off-the-shelf dispatch availability and next-day delivery. With multiple sizes and style variants available, finding the perfect drain for microcement applications is effortless, ensuring efficient delivery and exceptional product quality.

This innovative new vinyl floor drain is the latest addition to our collection. This drain offers you a clean modern look and a solid water tight seal. It consists of 3 parts all made of high quality stainless steel, that is both scratch and dent resistant.

The Body and clamp were specifically designed in such a way not to create stress on the floor covering, extending the longevity of the material. While the sleek low profile covers, 3 to choose from, are easily removable for maintenance.

This drain also comes with the McAlpine HC26 50 mm waste trap and adjustable legs that make installation quick and easy. It provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

This set is the ideal product for any wet room, kitchen or maintenance room that has a vinyl floor covering and requires a floor drain.

The 1000 mm x 1000 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The NGTouch is an easy-to-use touchscreen thermostat with a range of functions designed to make controlling your underfloor heating easy.

You can programme the NGTouch to suit your daily schedule.

The simple touchscreen interface allows you to select various modes depending on your lifestyle including holiday mode, boost for an hour of full-power warmth or eco mode.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The Dallmer SOLOS BS 2'' waste trap is included with our Flexi Shower Bases. The flow rate of 43.2 L/min.

The outlet is solvent weldable to a 2” BS pipe, but also comes with a 1.5” solvent weld reducer. It features a ball joint connector adjustable to 15 degrees in any direction.

The wet room shower former, measuring 900 x 1600 mm, stands as one of the largest tray bases available in our store. If you notice unused space in your bathroom and aspire to add that extra bathroom you've always desired, this spacious walk-in shower tray is an ideal choice. It not only provides ample room but also imparts a warm and luxurious feeling, enhancing your daily rituals with the pleasure of beginning and ending your day in a beautiful setting.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a One-Way single slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

If you are tanking a large room or several smaller ones perhaps a 50 metre roll of sealing tape might be a good investment. The sealing tape is ideal for sealing any joints that are too big to fill with the PCI lastogum alone.

Great for sealing any room corners, as well as where the walls meet the floors or ceilings. As we as the perimeter or the shower tray to its surroundings.

This grating is laser cut from a thick piece of premium stainless steel and features a Circles pattern. It was specifically designed to replace the standard cover that comes with all our Quadra shower trays.

The NGTouch WiFi thermostat is an easy-to-use touchscreen thermostat allowing remote control from an app when you're away from home. The NGTouch WiFi thermostat offers remote operation from anywhere in the world via a companion App.

The colour touchscreen wall control can also be programmed locally in the home. This simple-to-use thermostat has various lifestyle modes including comfort, frost protection, holiday and boost for an hour of full-power heat. The wireless App or the local device can be programmed to suit your lifestyle with 4 or 6 'heating events' per day.

This wireless control enables all aspects of the setup and operation of the NGTouch WiFi thermostat to be carried out via the straightforward App.

You can choose to individually control a single thermostat, or combine multiple thermostats to create heating zones.

The largest square shower tray, measuring 1200 x 1200 mm, accommodates larger shower areas and ensures a comfortable and easily accessible shower experience. While this size kit may not be suitable for the smallest bathrooms, it features an integrated, elongated drain that offers a modern aesthetic. With the floor appearing as a single expanse and only a drainage hole visible, it creates a seamless look that enhances the feeling of space in the bathroom.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a One-Way single slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The 900 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs!

It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided

The 900 mm x 1850 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The WetroomStop Linear Clamp Tray 800 x 1200 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 800 x 1200 mm is one of the more popular wet room tray sizes in our store. The 800 mm width is suitable for installation where space is limited, but at the same time 1200 mm length offers plenty of space for a comfortable sloped entrance.

A different variant on the popular size as it offers the drain along the long 1500mm side. The drain on this tray is located 150mm from the edge of the tray and is 600mm long. Great option for a “his and hers” shower or one that has fixtures along the long side of the shower. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This grating is laser cut from a thick piece of premium stainless steel and features a Stripes pattern. It was specifically designed to replace the standard cover that comes with all our Quadra shower trays.