Best sellers

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

The 800 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 800 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 900 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 1000 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 900 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 900 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 800 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 1000 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The internal corner is a prefabricated insert that makes sealing the corners of your shower or wet room quick and easy. Glued in place with the PCI lastogum it ensures that all internal corners are sealed correctly.

Although you will find two of these in the standard Wetroomstop Sealing Set, you may need more. These can be purchased individually.

Delivered sealing corner will be exactly as per picture. It is internal for the wall.

Cement coated building boards are used for creating a waterproof surface suitable for fixing wall and floor tiles to. Thanks to them you can level out old concrete or wooden subfloors in your bathroom. They are commonly used in showers, steam rooms, and swimming pools etc.

Works great with our shower trays. These 6mm panels can be used to match the thickness of your subfloor to create the perfect barrier free wetroom floor.

The 1000 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 900 mm x 1600 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

The 800 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

The 900 mm x 1400 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 1000 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.