Best sellers

Our most popular size tray, but this one offers the drain along the 1200mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Our most popular size tray, but this one offers the drain along the 1700mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

If you are tanking a large room or several smaller ones perhaps a 50 metre roll of sealing tape might be a good investment. The sealing tape is ideal for sealing any joints that are too big to fill with the PCI lastogum alone.

Great for sealing any room corners, as well as where the walls meet the floors or ceilings. As we as the perimeter or the shower tray to its surroundings.

Our new 1000mm Wetroomstop Linear Clamp Drain is the perfect product for someone looking for drainage solutions for vinyl floor finish. This 3 piece drain is made of high quality stainless steel. It looks great on any floor. The clamp down drain creates a watertight seal without straining the floor covering material. This is especially important in high traffic areas where premature wear on the floor covering may be an issue.

The cover is a brushed steel finish and comes in 3 different style designs. It is resistant to scratching or denting, perfect for commercial applications. It is easily removable as well with the key provided, making cleaning and maintenance a breeze.

The drain also comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also comes with stabilising legs to aid in installation.

This new initiative line of shower drains is the latest in our collection of wet room drain solutions. It is ideally suited for any vinyl floor applications. Whether for a shower or utility room or anywhere else that water is present, this drain is an excellent product to install to collect the waste water.

This elegant 600mm long linear drain has a brushed stainless steel finish, with your choice of 3 different covers. The clamp down frame can be used with a variety of floor coverings to create a seal. The end result is a clean non-invasive finish that is designed to last for years to come.

The design of the seat is made not to put too much stress on the material being used to cover the floor there by extending its life span. The solid cover prevents debris from clogging the drain while maintaining a clean look.

Paired with the McAlpine HC26 50mm waste trap this set really is the perfect answer to anyone looking for a vinyl floor drain. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

For use in conjunction with fixing screws to secure cement boards to walls and/or floors.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

The largest of our new vinyl clamp down floor drains. This 1200mm long Wetroomstop Linear Clamp Drain is ideal for large wet rooms, pools, or commercial spaces. It’s low profile clamp provides a solid seal without causing stress and prematurely wearing out the floor covering.

The drain with its high grade stainless steel cover is strong enough to withstand quite a load and is not easily scratched or dented. The cover comes in 3 different styles to choose from. It is profiled in such a way to allow water to drain properly while also not causing an obstacle for wheels to roll over.

The drain along with the McAlpine HC26 50 mm waste trap that it comes with, allow for excellent water drainage while providing easy access for maintenance. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Sharp point, zinc plated drywall screws used for fixing cement board to walls and/or floors.

Available in a variety of lengths from 25mm to 75mm long.

The new linear clamp down vinyl floor drain is the latest addition to our collection. Its sleek design combines functionality and aesthetics to bring you a one of a kind floor drain. The clamped down frame creates a watertight seal without putting too much stress on the floor covering extending its longevity.

The brushed steel finished covers (your choice of 3 styles) create a clean look that is both practical and sturdy. It is made of high grade stainless steel that is resistant to scratches or dents. The cover is easily removable for cleaning and maintenance using the key provided.

The drain also includes with it the McAlpine HC26 50mm. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Vertical ACO V50 waste trap is supplied with an EU 50mm to UK 50mm(2”) adapter.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

This innovative new vinyl floor drain is the latest addition to our collection. This drain offers you a clean modern look and a solid water tight seal. It consists of 3 parts all made of high quality stainless steel, that is both scratch and dent resistant.

The Body and clamp were specifically designed in such a way not to create stress on the floor covering, extending the longevity of the material. While the sleek low profile covers, 3 to choose from, are easily removable for maintenance.

This drain also comes with the McAlpine HC26 50 mm waste trap and adjustable legs that make installation quick and easy. It provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

This set is the ideal product for any wet room, kitchen or maintenance room that has a vinyl floor covering and requires a floor drain.

One of our largest trays, ensures that the whole area is sloped toward the drain and all the water is directed toward it. The 600mm linear drain is located parallel to the 1 m side. It sits 150mm from the edge. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The largest of our new vinyl clamp down floor drains. This 1200mm long Wetroomstop Linear Clamp Drain is ideal for large wet rooms, pools, or commercial spaces. It’s low profile clamp provides a solid seal without causing stress and prematurely wearing out the floor covering.

The drain with its high grade stainless steel cover is strong enough to withstand quite a load and is not easily scratched or dented. The cover comes in 3 different styles to choose from. It is profiled in such a way to allow water to drain properly while also not causing an obstacle for wheels to roll over.

The drain along with the McAlpine HC26 50 mm waste trap that it comes with, allow for excellent water drainage while providing easy access for maintenance. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

This grating is laser cut from a thick piece of premium stainless steel and features a Stripes pattern. It was specifically designed to replace the standard cover that comes with all our Quadra shower trays.

This grating is laser cut from a thick piece of premium stainless steel and features a Circles pattern. It was specifically designed to replace the standard cover that comes with all our Quadra shower trays.

The most popular size tray. Allows ample space for showering and does not take up too much space in the room. The 600mm linear drain channel is parallel to the 900mm side and is 150mm away from the edge of the tray. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Our most popular size tray, but this one offers the drain along the 1200mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The most popular size tray. Allows ample space for showering and does not take up too much space in the room. The 600mm linear drain channel is parallel to the 900mm side and is 150mm away from the edge of the tray. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This popular size tray is an excellent option for a walk-in shower where space may be limited. The drain is located along the short end, 150mm from the edge, designating one end as the shower area and the far end as the entrance to the shower. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.