End Drain
-
2 Way wet room shower tray 900 x 1850 x 30 mm Linear End 600 mm Flexi Black Dual
£1,251.84The largest wet room kit, measuring 900 x 1850 mm, features a shower tray designed for installation in rooms with ample space. A walk-in shower flooring not only expands the bathroom area but also introduces a modern, simple, and fresh aesthetic, enhancing the attractiveness of the restroom. Moreover, it provides easy accessibility for individuals with mobility issues. The Showerlay of this size is particularly suitable for large tile formats, although it can still accommodate even small mosaic tiles if desired.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
- -40%
-40%2 Way wet room shower tray 1000 x 1200 x 30 mm Linear End 600 mm Flexi Silver Dual
£470.25 £783.74The Top Tier wet room kit walk-in shower tray, sized at 1000 x 1200 mm, is a standard former. Designed to be low level, it provides ample shower space while boasting remarkable versatility, compatible with various shower screens and doors. Its square shape enables placement in any part of the room, whether neatly nestled into a corner or positioned elsewhere, offering flexibility in room layout.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
2 Way wet room shower tray 1000 x 1200 x 30 mm Linear End 600 mm Flexi Black Dual
£1,058.05The Top Tier wet room kit walk-in shower tray, sized at 1000 x 1200 mm, is a standard former. Designed to be low level, it provides ample shower space while boasting remarkable versatility, compatible with various shower screens and doors. Its square shape enables placement in any part of the room, whether neatly nestled into a corner or positioned elsewhere, offering flexibility in room layout.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
2 Way wet room shower tray 1000 x 1200 x 30 mm Linear End 600 mm Flexi Gold Dual
£1,058.05The Top Tier wet room kit walk-in shower tray, sized at 1000 x 1200 mm, is a standard former. Designed to be low level, it provides ample shower space while boasting remarkable versatility, compatible with various shower screens and doors. Its square shape enables placement in any part of the room, whether neatly nestled into a corner or positioned elsewhere, offering flexibility in room layout.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
- -40%
-40%2 Way wet room shower tray 1000 x 1500 x 30 mm Linear End 600 mm Flexi Silver Dual
£523.00 £871.67The Top Tier wet room kit walk-in shower tray, measuring 1000 x 1500 mm, represents a standard former size. Engineered to be low level, it provides generous shower space while maintaining remarkable versatility, compatible with various shower screens and doors. Its square shape allows for placement in any part of the room, whether neatly tucked into a corner or positioned elsewhere, offering flexibility in room layout.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
2 Way wet room shower tray 1000 x 1500 x 30 mm Linear End 600 mm Flexi Black Dual
£1,176.76The Top Tier wet room kit walk-in shower tray, measuring 1000 x 1500 mm, represents a standard former size. Engineered to be low level, it provides generous shower space while maintaining remarkable versatility, compatible with various shower screens and doors. Its square shape allows for placement in any part of the room, whether neatly tucked into a corner or positioned elsewhere, offering flexibility in room layout.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
Our offer
About us
Support
payment method
