Best sellers

This spacious square tray offers a variety of installation options. Allowing you to place the drain along whichever side you seem fit. The 600 mm linear drain is located 150mm from the edge of the tray leaving 200mm on each end. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This longer but narrow tray is a great option for a small shower with a comfortable entrance. The drain is located 150mm from the short end  while the far end of the tray still has a sloped floor. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This tray is a great option for covering a large area of the room with a sloped floor. This will ensure that the room does not have any standing water left after it's been used. The 600mm drain at the end of the tray will collect all the water and drain it away. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The smallest of the trays we offer. Square in shape, with the 600mm channel located 150mm from the edge of the tray and 100mm on each end. The tray can be rotated and installed with the drain along  the top or the side. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The longest tray in our series. This tray is twice as long as it is wide and is a great option when considering having the entire floor of a small wet room contain a slope toward the drain. The tray's slope is very gradual however it's sufficient enough that the water from the entire tray will find its way to the drain. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Our most popular size tray, but this one offers the drain along the 1400mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

This new linear clamp down vinyl floor drain is perfect for anyone looking for a simple yet stylish solution to any wet room. The 700mm drain is composed of 3 pieces, all constructed of high quality stainless steel that is resistant to scratching or dents. It is finished in a brushed steel finish to give it an elegant look.

The drain comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The cover which comes in 3 different styles, is easily removed with the key provided to allow for quick and easy maintenance. The body and the frame are clamped down creating a seal that is not only water tight but does not cause premature wear and tear on the floor covering This extends the life of the floor allowing for a piece-of-mind for years to come.

The newest addition to our collection, and the perfect solution to any vinyl flooring drainage application. This new Wetroomstop Linear Clamp Drain creates a clean look while also providing a strong and long lasting seal.

This Drain is the smallest in our line up. Ideal for where space is limited, but maximum drainage is necessary. The drain body, clamp and cover are all made of high grade stainless steel and are resistant to any form of scratching or discolouration.

Paired with the McAlpine HC26 50MM waste trap, This trap provides ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

With your choice of 3 cover designs that are all made of high grade stainless steel with a brushed finish. The covers are solid and sturdy so they can be stepped on or rolled over without worrying that it will get scratched or bent out of shape. Using the key provided it can be easily lifted out for cleaning out the trap. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The newest addition to our collection, and the perfect solution to any vinyl flooring drainage application. This new Wetroomstop Linear Clamp Drain creates a clean look while also providing a strong and long lasting seal.

This Drain is the smallest in our line up. Ideal for where space is limited, but maximum drainage is necessary. The drain body, clamp and cover are all made of high grade stainless steel and are resistant to any form of scratching or discolouration.

Paired with the McAlpine HC26 50MM waste trap, This trap provides ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

With your choice of 3 cover designs that are all made of high grade stainless steel with a brushed finish. The covers are solid and sturdy so they can be stepped on or rolled over without worrying that it will get scratched or bent out of shape. Using the key provided it can be easily lifted out for cleaning out the trap. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

This new initiative line of shower drains is the latest in our collection of wet room drain solutions. It is ideally suited for any vinyl floor applications. Whether for a shower or utility room or anywhere else that water is present, this drain is an excellent product to install to collect the waste water.

This elegant 600mm long linear drain has a brushed stainless steel finish, with your choice of 3 different covers. The clamp down frame can be used with a variety of floor coverings to create a seal. The end result is a clean non-invasive finish that is designed to last for years to come.

The design of the seat is made not to put too much stress on the material being used to cover the floor there by extending its life span. The solid cover prevents debris from clogging the drain while maintaining a clean look.

Paired with the McAlpine HC26 50mm waste trap this set really is the perfect answer to anyone looking for a vinyl floor drain. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

This 1100mm clamp down drain is a part of our new Vinyl floor drain collection. Its sleek low profile designs combine ascetics with functionality, to provide an excellent choice for any vinyl floor covering.

The 3 piece drain is made of high quality stainless steel. It is both scratch and dent resistant, making it ideal for high traffic areas. The design of the clamp provides a watertight seal but also does not stress out the floor covering extending the life of the material used.

The brushed steel cover is modern looking and comes in 3 different style options. It can easily be removed for cleaning and maintenance with the special key that is provided in the set.

The drain comes with stabilising legs and a McAlpine waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The largest of our new vinyl clamp down floor drains. This 1200mm long Wetroomstop Linear Clamp Drain is ideal for large wet rooms, pools, or commercial spaces. It’s low profile clamp provides a solid seal without causing stress and prematurely wearing out the floor covering.

The drain with its high grade stainless steel cover is strong enough to withstand quite a load and is not easily scratched or dented. The cover comes in 3 different styles to choose from. It is profiled in such a way to allow water to drain properly while also not causing an obstacle for wheels to roll over.

The drain along with the McAlpine HC26 50 mm waste trap that it comes with, allow for excellent water drainage while providing easy access for maintenance. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The WetroomStop Linear Clamp Tray 900 x 1200 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated clamp drain that has a mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 1200 mm is the best selling size in our store. The length and width complement each other giving you a sufficient sized shower area that does not require a closed cabin as the sloped floor will catch any of the water that splashes away from the shower area.

The WetroomStop Linear Clamp Tray 900 x 1400 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 1400 mm offers similar benefits to its smaller counterparts, whilst allowing you to have a wider entrance. It can be used wall to wall in smaller rooms or placed in larger rooms with a large portion of the floor being sloped toward the drain. This gives you the piece of mind that there will not be any standing water on your surrounding floor area after use.

The WetroomStop Linear Clamp Tray 900 x 1700 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 1700 mm tray provides a gentle slope all the way to the drain. It will give you larger coverage of the floor area that will guide water toward the drain safely. Great for larger rooms where you don't want the slope to be as noticeable.

The WetroomStop Linear Clamp Tray 900 x 1850 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 1850 mm tray is the longest in our store. It is great for larger rooms that require a lot of the floor area to be sloped. It gives you the peace of mind that all water from the shower will find its way back to the drain. The gentle slope provides efficient drainage without making the floor feel or look slanted.

The WetroomStop Linear Clamp Tray 800 x 800 mm is a wet room tray designed specifically for vinyl floor coverings. It comes with an integrated clamp drain that has a mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 800 x 800 mm tray is the smallest of our standard sizes, making it ideal for even the smallest of spaces. This wet room tray allows you to achieve a barrier free easy access shower in small rooms or conversions.

The WetroomStop Linear Clamp Tray 800 x 1200 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 800 x 1200 mm is one of the more popular wet room tray sizes in our store. The 800 mm width is suitable for installation where space is limited, but at the same time 1200 mm length offers plenty of space for a comfortable sloped entrance.

The WetroomStop Linear Clamp Tray 900 x 900 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated clamp drain that mechanically secures the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 900 mm is the second smallest standard wet room tray available for vinyl flooring. Its compact size is close to one metre square. The small size of the tray helps the water in shower area to find its way to the drain faster as the slope is steeper. This is an optimal wet room tray for creating a spacious shower in a restricted space.

The WetroomStop Linear Clamp Tray 900 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.

The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.

The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.

This WetroomStop Linear Clamp Tray 900 x 1500 mm is ideal for wet rooms where you want the whole area of a room to be designated as the shower area. It will not only provide excellent direct drainage in the immediate shower area, but also from the entrance, ensuring that all water flow finds its way to the drain.