Best sellers
-
- -40%
-40%
2 Way wet room shower tray 1200 x 1200 x 30 mm Linear End 600 mm Flexi Silver Dual
£507.92
£846.54
The largest square shower tray, measuring 1200 x 1200 mm, accommodates larger shower areas and ensures a comfortable and easily accessible shower experience. While this size kit may not be suitable for the smallest bathrooms, it features an integrated, elongated drain that offers a modern aesthetic. With the floor appearing as a single expanse and only a drainage hole visible, it creates a seamless look that enhances the feeling of space in the bathroom.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1500 x 1000 x 30 mm Linear Side 600 mm Flexi Gold Dual
£726.39
Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1500 x 1000 x 30 mm Linear Side 600 mm Flexi Black Dual
£726.39
Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1850 x 900 x 30 mm Linear Side 600 mm Flexi Black Dual
£772.74
Our most popular size tray, but this one offers the drain along the 1850mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
McAlpine Replacement Parts
£20.00
-
Wet Room Shower Tray 1700 x 900 x 30 mm Linear Side 600 mm Flexi Gold Dual
£742.83
This tray has the drain along the long 1700mm side of the tray. It is perfect for a “his and hers” shower or a shower that has a walk through with entrances from both sides. The 600 mm drain is centred on the tray along the long side of it. It is located 150mm from the edge. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1200 x 900 x 30 mm Linear Side 600 mm Flexi Black Dual
£575.63
Our most popular size tray, but this one offers the drain along the 1200mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 1700 x 30 mm Linear End 600 mm Flexi Gold Dual
£742.83
This tray is a great option for covering a large area of the room with a sloped floor. This will ensure that the room does not have any standing water left after it's been used. The 600mm drain at the end of the tray will collect all the water and drain it away. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 1600 x 30 mm Linear End 600 mm Flexi Gold Dual
£651.62
Spacious tray with longer entrance option. This 1.6 metre long tray allows you to have a wide screen without sacrificing the entrance opening. The 600mm long linear drain is located 150mm from the short side of the tray and offers a gradual slope from all sides. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 900 x 30 mm Linear End 600 mm Flexi Gold Dual
£548.16
Very compact tray, square in shape, can be installed with the drain along any side. The 600mm linear drain is located 150mm for the edge of the tray and has 150mm of tray on both ends. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1000 x 1000 x 30 mm Linear End 600 mm Flexi Black Dual
£621.71
This spacious square tray offers a variety of installation options. Allowing you to place the drain along whichever side you seem fit. The 600 mm linear drain is located 150mm from the edge of the tray leaving 200mm on each end. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
- -30%
-30%
Walk-in Shower Screen Wetroomstop 1100 x 2000 mm Timeless Silver
£445.61
£636.58
Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
- -30%
-30%
Walk-in Shower Screen Wetroomstop 800 x 2000 mm Timeless Silver
£403.98
£577.11
Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
- -30%
-30%
Walk-in Shower Screen Wetroomstop 700 x 2000 mm Timeless Silver
£389.91
£557.02
Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
2.0 m² Heatmat Electric Underfloor Heating 160W mat 0.5 x 4.0 m kit
£324.00
Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store.
Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.
Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.
Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.
Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.
-
1.1 m² Heatmat Electric Underfloor Heating 160W mat 0.5 x 2.2 m kit
£261.60
Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store.
Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.
Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.
Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.
Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.
-
Wet Room Shower Tray 900 x 1500 mm Vinyl Line
£602.54
The WetroomStop Linear Clamp Tray 900 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 1500 mm is ideal for wet rooms where you want the whole area of a room to be designated as the shower area. It will not only provide excellent direct drainage in the immediate shower area, but also from the entrance, ensuring that all water flow finds its way to the drain.
-
Wet Room Shower Tray 800 x 1500 mm Vinyl Line
£553.63
The WetroomStop Linear Clamp Tray 800 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain with a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 800 x 1500 mm wet room trays is one of our best selling sized trays. It allows you to create a modern and an accessible spacious shower area, where the shower area width is limited.
-
Wet Room Shower Tray 900 x 1500 mm Vinyl Bubbles
£602.54
The WetroomStop Linear Clamp Tray 900 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 1500 mm is ideal for wet rooms where you want the whole area of a room to be designated as the shower area. It will not only provide excellent direct drainage in the immediate shower area, but also from the entrance, ensuring that all water flow finds its way to the drain.
-
Wet Room Shower Tray 900 x 900 mm Vinyl Bubbles
£489.78
The WetroomStop Linear Clamp Tray 900 x 900 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated clamp drain that mechanically secures the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 900 mm is the second smallest standard wet room tray available for vinyl flooring. Its compact size is close to one metre square. The small size of the tray helps the water in shower area to find its way to the drain faster as the slope is steeper. This is an optimal wet room tray for creating a spacious shower in a restricted space.
-
Linear Shower Drain 1000 mm Clamp Sprinkle
£386.11
Our new 1000mm Wetroomstop Linear Clamp Drain is the perfect product for someone looking for drainage solutions for vinyl floor finish. This 3 piece drain is made of high quality stainless steel. It looks great on any floor. The clamp down drain creates a watertight seal without straining the floor covering material. This is especially important in high traffic areas where premature wear on the floor covering may be an issue.
The cover is a brushed steel finish and comes in 3 different style designs. It is resistant to scratching or denting, perfect for commercial applications. It is easily removable as well with the key provided, making cleaning and maintenance a breeze.
The drain also comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.
The set also comes with stabilising legs to aid in installation.
-
Waterproofing Kit 28 m² PCI Lastogum
£744.92
Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.
-
Waterproofing Kit 24.5 m² PCI Lastogum
£652.43
Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.
-
-
- -40%
-40%2 Way wet room shower tray 1200 x 1200 x 30 mm Linear End 600 mm Flexi Silver Dual
£507.92 £846.54The largest square shower tray, measuring 1200 x 1200 mm, accommodates larger shower areas and ensures a comfortable and easily accessible shower experience. While this size kit may not be suitable for the smallest bathrooms, it features an integrated, elongated drain that offers a modern aesthetic. With the floor appearing as a single expanse and only a drainage hole visible, it creates a seamless look that enhances the feeling of space in the bathroom.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a Two-Way double slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1500 x 1000 x 30 mm Linear Side 600 mm Flexi Gold Dual
£726.39Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1500 x 1000 x 30 mm Linear Side 600 mm Flexi Black Dual
£726.39Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1850 x 900 x 30 mm Linear Side 600 mm Flexi Black Dual
£772.74Our most popular size tray, but this one offers the drain along the 1850mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
McAlpine Replacement Parts
£20.00 -
Wet Room Shower Tray 1700 x 900 x 30 mm Linear Side 600 mm Flexi Gold Dual
£742.83This tray has the drain along the long 1700mm side of the tray. It is perfect for a “his and hers” shower or a shower that has a walk through with entrances from both sides. The 600 mm drain is centred on the tray along the long side of it. It is located 150mm from the edge. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1200 x 900 x 30 mm Linear Side 600 mm Flexi Black Dual
£575.63Our most popular size tray, but this one offers the drain along the 1200mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 1700 x 30 mm Linear End 600 mm Flexi Gold Dual
£742.83This tray is a great option for covering a large area of the room with a sloped floor. This will ensure that the room does not have any standing water left after it's been used. The 600mm drain at the end of the tray will collect all the water and drain it away. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 1600 x 30 mm Linear End 600 mm Flexi Gold Dual
£651.62Spacious tray with longer entrance option. This 1.6 metre long tray allows you to have a wide screen without sacrificing the entrance opening. The 600mm long linear drain is located 150mm from the short side of the tray and offers a gradual slope from all sides. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 900 x 900 x 30 mm Linear End 600 mm Flexi Gold Dual
£548.16Very compact tray, square in shape, can be installed with the drain along any side. The 600mm linear drain is located 150mm for the edge of the tray and has 150mm of tray on both ends. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
Wet Room Shower Tray 1000 x 1000 x 30 mm Linear End 600 mm Flexi Black Dual
£621.71This spacious square tray offers a variety of installation options. Allowing you to place the drain along whichever side you seem fit. The 600 mm linear drain is located 150mm from the edge of the tray leaving 200mm on each end. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.
Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.
These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.
-
- -30%
-30%Walk-in Shower Screen Wetroomstop 1100 x 2000 mm Timeless Silver
£445.61 £636.58Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
- -30%
-30%Walk-in Shower Screen Wetroomstop 800 x 2000 mm Timeless Silver
£403.98 £577.11Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
- -30%
-30%Walk-in Shower Screen Wetroomstop 700 x 2000 mm Timeless Silver
£389.91 £557.02Wet room glass panel, assembled using the best quality materials. Contemporary and practical, timeless design, featuring toughened 8 mm thick safety glass and polished silver accessories. Active Shield layer protects the glass from dirt.
Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.
Strict, raw and economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square chrome retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.
Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.
-
2.0 m² Heatmat Electric Underfloor Heating 160W mat 0.5 x 4.0 m kit
£324.00Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store.
Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.
Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.
Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.
Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.
-
1.1 m² Heatmat Electric Underfloor Heating 160W mat 0.5 x 2.2 m kit
£261.60Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store.
Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.
Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.
Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.
Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.
-
Wet Room Shower Tray 900 x 1500 mm Vinyl Line
£602.54The WetroomStop Linear Clamp Tray 900 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 1500 mm is ideal for wet rooms where you want the whole area of a room to be designated as the shower area. It will not only provide excellent direct drainage in the immediate shower area, but also from the entrance, ensuring that all water flow finds its way to the drain.
-
Wet Room Shower Tray 800 x 1500 mm Vinyl Line
£553.63The WetroomStop Linear Clamp Tray 800 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain with a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 800 x 1500 mm wet room trays is one of our best selling sized trays. It allows you to create a modern and an accessible spacious shower area, where the shower area width is limited.
-
Wet Room Shower Tray 900 x 1500 mm Vinyl Bubbles
£602.54The WetroomStop Linear Clamp Tray 900 x 1500 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated drain that has a clamping mechanism which allows it to secure the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 1500 mm is ideal for wet rooms where you want the whole area of a room to be designated as the shower area. It will not only provide excellent direct drainage in the immediate shower area, but also from the entrance, ensuring that all water flow finds its way to the drain.
-
Wet Room Shower Tray 900 x 900 mm Vinyl Bubbles
£489.78The WetroomStop Linear Clamp Tray 900 x 900 mm, available in 3 thicknesses, is a is a wet room tray for vinyl floors. It comes with an integrated clamp drain that mechanically secures the edges of the vinyl sheet around the drain.
The tray is made of XPS foam, which is lightweight but durable and offers insulation properties. It is reinforced with fibreglass mesh and cement based glue from both sides. It also has a waterproof membrane on the top side for added protection.The tray can also be trimmed down if required to fit a specific dimension.
The tray comes as a complete set, with a brushed stainless steel cover that is available in a variety of styles. A McAlpine HC26-50 waste trap with 1.5’’ size outlet, and the optional WetroomStop Waterproofing Kit.
This WetroomStop Linear Clamp Tray 900 x 900 mm is the second smallest standard wet room tray available for vinyl flooring. Its compact size is close to one metre square. The small size of the tray helps the water in shower area to find its way to the drain faster as the slope is steeper. This is an optimal wet room tray for creating a spacious shower in a restricted space.
-
Linear Shower Drain 1000 mm Clamp Sprinkle
£386.11Our new 1000mm Wetroomstop Linear Clamp Drain is the perfect product for someone looking for drainage solutions for vinyl floor finish. This 3 piece drain is made of high quality stainless steel. It looks great on any floor. The clamp down drain creates a watertight seal without straining the floor covering material. This is especially important in high traffic areas where premature wear on the floor covering may be an issue.
The cover is a brushed steel finish and comes in 3 different style designs. It is resistant to scratching or denting, perfect for commercial applications. It is easily removable as well with the key provided, making cleaning and maintenance a breeze.
The drain also comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.
The set also comes with stabilising legs to aid in installation.
-
Waterproofing Kit 28 m² PCI Lastogum
£744.92Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.
-
Waterproofing Kit 24.5 m² PCI Lastogum
£652.43Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.
-
Our offer
About us
Support
payment method
