Home

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

Our most popular size tray, but this one offers the drain along the 1500mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The 800 mm x 1800 mm shower base is 26 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

Waterproofing is key, so don't economise here. PCI Lastogum is well known by professionals in the industry. That's why every year we sell almost 10,000 waterproofing sets. It is extremely fast drying and therefore the tilers don't have to waste time waiting days for drying! The primer will help to increase adhesion on poor surfaces. The tape is for securing all corners and joints along with the pre-made corners. The two pipe collars are to secure around the hot and cold pipes that pass through the wall to the shower control.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The 800 mm x 800 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 1000 mm x 1200 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The 1000 mm x 1000 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 900 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The 1200 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The 900 mm x 1700 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The newest addition to our collection, and the perfect solution to any vinyl flooring drainage application. This new Wetroomstop Linear Clamp Drain creates a clean look while also providing a strong and long lasting seal.

This Drain is the smallest in our line up. Ideal for where space is limited, but maximum drainage is necessary. The drain body, clamp and cover are all made of high grade stainless steel and are resistant to any form of scratching or discolouration.

Paired with the McAlpine HC26 50MM waste trap, This trap provides ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

With your choice of 3 cover designs that are all made of high grade stainless steel with a brushed finish. The covers are solid and sturdy so they can be stepped on or rolled over without worrying that it will get scratched or bent out of shape. Using the key provided it can be easily lifted out for cleaning out the trap. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The 1000 mm x 1200 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.