The 900 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.
The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.
The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.
The 150 mm x 150 mm Dallmer gulley is integrated in an offset position. This means that it is 450mm from the short end and centred from each side.
Each tray comes complete with a standard stainless steel cover.
The K frame and stainless steel plate are factory fitted to the shower base to provide a perfect surface for the trap sealing ring to adhere to, making installation really easy. If you are using thicker tiles, an extension for the K frame is included.
The outlet pipe comes with a 2” BS ABS solvent weld adaptor allowing for a quick and secure connection to UK pipes. You can also upgrade to a 5 mm solid stainless steel cover, available in two different designs.
.png "Dallmer Waste Technical Diagram")
No we do not currently sell the waterproofing liquid separately. You can purchase an additional tanking kit if you wish. It comes with 4 kg of lastogum, 1L of primer, 10m of sealing tape, 2 internal corners, and 2 pipe collars
Hello Luke,
Thank you for your message.
I can confirm that our trays are trimmable and there are several options for your 1300 x 700 shower area.
We can manufacture a bespoke tray to match that size exactly. It would take about 10 days and would have higher price but it wouldn't need any extra materials or effort,
In case of any other questions I will be happy to assist.
Kind regards
Chris 020 8145 4804
The pipe collars provided with our tanking kits are to be used if you have water pipes sticking out of the wall for your shower valve. They are optional and only need to be used if required.
The flow rate of the Dallmer type 48 KE shower trap is 40.82L/min
The Quadra gulleys have a lip 10 mm, additionally there is a 7mm extension that is provided. If you are using a thicker tile such as 18mm you can request a second extension in order to raise the cover even higher to accommodate for the extra height required. You can then set the times at the correct height using the appropriate amount of tile adhesive to match the height of the cover.
The 900 mm x 1500 mm shower base is 20 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.
The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The drain is offset from the centre of the tray, creating a shower zone to one end of the tray. While leaving the other end is more of a walkway or entrance to the shower. This allows for the entrance to still have a gradual slope for water to flow back toward the drain.
The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray. The height of the drain is 10mm, however this can be extended to 17mm using the extension provided.
