Home

For plumbers, builders and installers who are regularly preparing wetrooms, we can offer you Primer in a 5 Litre container.

It's a much more cost effective solution if you require a large amount of primer. It's also a good idea if you intend to do several installations.

The 1000 mm x 1500 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

All our PVD coated linear drains are crafted from premium 304 grade stainless steel, ensuring durability and longevity. Each drain comprises three essential components: the drain body, adjustable frame, and reversible cover. With your purchase, you receive stainless steel adjustable legs, a pre-glued waterproof membrane, and the option to select your preferred waste trap. The reversible cover offers versatility, allowing you to opt for either a smooth steel finish or flip the cover to tile inside the insert for a fully tiled appearance in your wet room. Furthermore, the height of the drain is adjustable, providing a range from 8mm to 12mm, depending on the thickness of the tiles you intend to install.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

This new initiative line of shower drains is the latest in our collection of wet room drain solutions. It is ideally suited for any vinyl floor applications. Whether for a shower or utility room or anywhere else that water is present, this drain is an excellent product to install to collect the waste water.

This elegant 600mm long linear drain has a brushed stainless steel finish, with your choice of 3 different covers. The clamp down frame can be used with a variety of floor coverings to create a seal. The end result is a clean non-invasive finish that is designed to last for years to come.

The design of the seat is made not to put too much stress on the material being used to cover the floor there by extending its life span. The solid cover prevents debris from clogging the drain while maintaining a clean look.

Paired with the McAlpine HC26 50mm waste trap this set really is the perfect answer to anyone looking for a vinyl floor drain. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The 900 mm x 1400 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

The 900 mm x 1600 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

This new linear clamp down vinyl floor drain is perfect for anyone looking for a simple yet stylish solution to any wet room. The 700mm drain is composed of 3 pieces, all constructed of high quality stainless steel that is resistant to scratching or dents. It is finished in a brushed steel finish to give it an elegant look.

The drain comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The cover which comes in 3 different styles, is easily removed with the key provided to allow for quick and easy maintenance. The body and the frame are clamped down creating a seal that is not only water tight but does not cause premature wear and tear on the floor covering This extends the life of the floor allowing for a piece-of-mind for years to come.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The 900 mm x 1700 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The rectangular Matt Black wet room screen creates enviably trendy bathroom space. The 2000 mm high contemporary and practical glass, timeless design, featuring toughened 8 mm thick safety glass and matt black accesssories. Active Shield layer protects the glass from dirt.

Various size screens offer you the flexibility to find the perfect size to fit your application. Further benefits of this wet room screen is that the panel also comes with a stylish, wall support and sleek wall profile with adjustment for easy-installation in case when the walls aren’t completely flat.

Matt black aluminium creates a screen economical in form, is the new collection of our new walk-in shower screens. Supplied with seals, square retaining arm, fixtures and fittings. Clear and classic design makes the shower look exclusive and modern.

Product designed for installation next to a wet room tray. Wide choice of sizes, perfect to fit. Easy installation with included guide.

For those of you who are only looking to purchase a linear drain, we can help you too.

All our linear drains are produced from 304 grade stainless steel. The drain has 3 piece design: Drain body, adjustable frame and reversible cover.

Along with the drain you receive stainless steel adjustable legs, a pre-glued waterproof membrane and a high quality McAlpine HC26 50MM polypropylene waste trap.

You also get a reversible cover meaning you can either have a smooth steel finish or you can flip the cover over and tile inside the insert giving you a more completely tiled finish to your wet room.

The height of this drain is adjustable as well, giving you a range from 8mm-12mm depending on the thickness of the tiles you are planning on installing.

The 900 mm x 1850 mm shower base is 30 mm thick and is designed to be tiled over, providing level access into the shower without a step up. The shower base is produced from XPS foam and re-enforced on both sides with a fibreglass mesh and coated with a flexible cement. This surface is ready to tile onto. It's lightweight and flexible enough to absorb movement within the structural floor.

The XPS foam has great acoustic properties and therefore is an excellent choice for showers here in the UK, when you can generally hear everything that's going on upstairs! It can be easily trimmed if necessary, say around pipes or other obstacles, or if you are fitting a shower that is not quite the size of the tray.

The shower base has a machined slope cut into it, providing a 4 way fall from each corner to the drain. The enveloped shaped pattern helps guide the water toward the channel, eliminating the need to create fall on your own.

The new linear clamp down vinyl floor drain is the latest addition to our collection. Its sleek design combines functionality and aesthetics to bring you a one of a kind floor drain. The clamped down frame creates a watertight seal without putting too much stress on the floor covering extending its longevity.

The brushed steel finished covers (your choice of 3 styles) create a clean look that is both practical and sturdy. It is made of high grade stainless steel that is resistant to scratches or dents. The cover is easily removable for cleaning and maintenance using the key provided.

The drain also includes with it the McAlpine HC26 50mm. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.