Home

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

The largest of our new vinyl clamp down floor drains. This 1200mm long Wetroomstop Linear Clamp Drain is ideal for large wet rooms, pools, or commercial spaces. It’s low profile clamp provides a solid seal without causing stress and prematurely wearing out the floor covering.

The drain with its high grade stainless steel cover is strong enough to withstand quite a load and is not easily scratched or dented. The cover comes in 3 different styles to choose from. It is profiled in such a way to allow water to drain properly while also not causing an obstacle for wheels to roll over.

The drain along with the McAlpine HC26 50 mm waste trap that it comes with, allow for excellent water drainage while providing easy access for maintenance. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The newest addition to our collection, and the perfect solution to any vinyl flooring drainage application. This new Wetroomstop Linear Clamp Drain creates a clean look while also providing a strong and long lasting seal.

This Drain is the smallest in our line up. Ideal for where space is limited, but maximum drainage is necessary. The drain body, clamp and cover are all made of high grade stainless steel and are resistant to any form of scratching or discolouration.

Paired with the McAlpine HC26 50MM waste trap, This trap provides ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

With your choice of 3 cover designs that are all made of high grade stainless steel with a brushed finish. The covers are solid and sturdy so they can be stepped on or rolled over without worrying that it will get scratched or bent out of shape. Using the key provided it can be easily lifted out for cleaning out the trap. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Heatmat 160W mat offers a versatile and fast reacting underfloor heating system which is very simple to operate when used in conjunction with Heatmat's NGTouch thermostat, as well as other Heatmat thermostats available in our store. 

Integrated earth shield (unlike carbon films), allowing safe installation in wet areas including bathrooms. When used with an intelligent thermostat timer, 160W systems react faster, are more energy efficient and cost less to run than lower powered alternatives.

Ideal for tiled floors, and also perfect for use beneath carpet, bondedwood and vinyl surfaces if first covered with a levelling compound Compatible with thermal insulation boards for increased efficiency.

Pre-spaced heating cable for speedy installation and uniform heat output. Simple cut and turn design enables significantly faster installation than with loose cables.

Ultra-thin fluoropolymer insulated cable ensures minimum build height. Dual conductor cable design means only one connection lead.

This new linear clamp down vinyl floor drain is perfect for anyone looking for a simple yet stylish solution to any wet room. The 700mm drain is composed of 3 pieces, all constructed of high quality stainless steel that is resistant to scratching or dents. It is finished in a brushed steel finish to give it an elegant look.

The drain comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The cover which comes in 3 different styles, is easily removed with the key provided to allow for quick and easy maintenance. The body and the frame are clamped down creating a seal that is not only water tight but does not cause premature wear and tear on the floor covering This extends the life of the floor allowing for a piece-of-mind for years to come.

Our most popular size tray, but this one offers the drain along the 1200mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This new initiative line of shower drains is the latest in our collection of wet room drain solutions. It is ideally suited for any vinyl floor applications. Whether for a shower or utility room or anywhere else that water is present, this drain is an excellent product to install to collect the waste water.

This elegant 600mm long linear drain has a brushed stainless steel finish, with your choice of 3 different covers. The clamp down frame can be used with a variety of floor coverings to create a seal. The end result is a clean non-invasive finish that is designed to last for years to come.

The design of the seat is made not to put too much stress on the material being used to cover the floor there by extending its life span. The solid cover prevents debris from clogging the drain while maintaining a clean look.

Paired with the McAlpine HC26 50mm waste trap this set really is the perfect answer to anyone looking for a vinyl floor drain. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Our most popular size tray, but this one offers the drain along the 1700mm side of the tray. The drain is 600mm long and is located 150mm from the edge. This is a great option for a shower that is wider than it is longer. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This innovative new vinyl floor drain is the latest addition to our collection. This drain offers you a clean modern look and a solid water tight seal. It consists of 3 parts all made of high quality stainless steel, that is both scratch and dent resistant.

The Body and clamp were specifically designed in such a way not to create stress on the floor covering, extending the longevity of the material. While the sleek low profile covers, 3 to choose from, are easily removable for maintenance.

This drain also comes with the McAlpine HC26 50 mm waste trap and adjustable legs that make installation quick and easy. It provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

This set is the ideal product for any wet room, kitchen or maintenance room that has a vinyl floor covering and requires a floor drain.

Our new 1000mm Wetroomstop Linear Clamp Drain is the perfect product for someone looking for drainage solutions for vinyl floor finish. This 3 piece drain is made of high quality stainless steel. It looks great on any floor. The clamp down drain creates a watertight seal without straining the floor covering material. This is especially important in high traffic areas where premature wear on the floor covering may be an issue.

The cover is a brushed steel finish and comes in 3 different style designs. It is resistant to scratching or denting, perfect for commercial applications. It is easily removable as well with the key provided, making cleaning and maintenance a breeze.

The drain also comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also comes with stabilising legs to aid in installation.

This 1100mm clamp down drain is a part of our new Vinyl floor drain collection. Its sleek low profile designs combine ascetics with functionality, to provide an excellent choice for any vinyl floor covering.

The 3 piece drain is made of high quality stainless steel. It is both scratch and dent resistant, making it ideal for high traffic areas. The design of the clamp provides a watertight seal but also does not stress out the floor covering extending the life of the material used.

The brushed steel cover is modern looking and comes in 3 different style options. It can easily be removed for cleaning and maintenance with the special key that is provided in the set.

The drain comes with stabilising legs and a McAlpine waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The newest addition to our collection, and the perfect solution to any vinyl flooring drainage application. This new Wetroomstop Linear Clamp Drain creates a clean look while also providing a strong and long lasting seal.

This Drain is the smallest in our line up. Ideal for where space is limited, but maximum drainage is necessary. The drain body, clamp and cover are all made of high grade stainless steel and are resistant to any form of scratching or discolouration.

Paired with the McAlpine HC26 50MM waste trap, This trap provides ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

With your choice of 3 cover designs that are all made of high grade stainless steel with a brushed finish. The covers are solid and sturdy so they can be stepped on or rolled over without worrying that it will get scratched or bent out of shape. Using the key provided it can be easily lifted out for cleaning out the trap. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

This new linear clamp down vinyl floor drain is perfect for anyone looking for a simple yet stylish solution to any wet room. The 700mm drain is composed of 3 pieces, all constructed of high quality stainless steel that is resistant to scratching or dents. It is finished in a brushed steel finish to give it an elegant look.

The drain comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible. The set also includes adjustable legs for stabilising the drain and levelling it during installation.

The cover which comes in 3 different styles, is easily removed with the key provided to allow for quick and easy maintenance. The body and the frame are clamped down creating a seal that is not only water tight but does not cause premature wear and tear on the floor covering This extends the life of the floor allowing for a piece-of-mind for years to come.

The new linear clamp down vinyl floor drain is the latest addition to our collection. Its sleek design combines functionality and aesthetics to bring you a one of a kind floor drain. The clamped down frame creates a watertight seal without putting too much stress on the floor covering extending its longevity.

The brushed steel finished covers (your choice of 3 styles) create a clean look that is both practical and sturdy. It is made of high grade stainless steel that is resistant to scratches or dents. The cover is easily removable for cleaning and maintenance using the key provided.

The drain also includes with it the McAlpine HC26 50mm. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also includes adjustable legs for stabilising the drain and levelling it during installation.

Very compact tray, square in shape, can be installed with the drain along any side. The 600mm linear drain is located 150mm for the edge of the tray and has 150mm of tray on both ends. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The most popular size tray. Allows ample space for showering and does not take up too much space in the room. The 600mm linear drain channel is parallel to the 900mm side and is 150mm away from the edge of the tray. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

This innovative new vinyl floor drain is the latest addition to our collection. This drain offers you a clean modern look and a solid water tight seal. It consists of 3 parts all made of high quality stainless steel, that is both scratch and dent resistant.

The Body and clamp were specifically designed in such a way not to create stress on the floor covering, extending the longevity of the material. While the sleek low profile covers, 3 to choose from, are easily removable for maintenance.

This drain also comes with the McAlpine HC26 50 mm waste trap and adjustable legs that make installation quick and easy. It provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

This set is the ideal product for any wet room, kitchen or maintenance room that has a vinyl floor covering and requires a floor drain.

Our new 1000mm Wetroomstop Linear Clamp Drain is the perfect product for someone looking for drainage solutions for vinyl floor finish. This 3 piece drain is made of high quality stainless steel. It looks great on any floor. The clamp down drain creates a watertight seal without straining the floor covering material. This is especially important in high traffic areas where premature wear on the floor covering may be an issue.

The cover is a brushed steel finish and comes in 3 different style designs. It is resistant to scratching or denting, perfect for commercial applications. It is easily removable as well with the key provided, making cleaning and maintenance a breeze.

The drain also comes with a McAlpine HC26 50mm waste trap. This trap provides an ample flow rate of [l/min]: 26/50 (for a 15 mm/120 mm liquid column) The trap has a height of 61mm and Water seal of 20 mm. It also has easy access for cleaning and has a 1.5 inch outlet pipe. The trap comes with a 90° elbow to make connecting in any direction possible.

The set also comes with stabilising legs to aid in installation.

Very popular size tray. Provides an excellent walk in shower size where the opening for the entrance can remain open. The drain is 600mm long and is parallel to the 900mm side. It is located 150mm from the edge of the tray. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

The smallest of the trays we offer. Square in shape, with the 600mm channel located 150mm from the edge of the tray and 100mm on each end. The tray can be rotated and installed with the drain along  the top or the side. Our Wet Room Shower Trays with Linear drains for tiled floors are the most versatile shower former you will find. They come with an integrated 600mm linear drain and are available in various sizes with different drain positions.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a 4 way slope machine cut into with an estimated 1-2% gradient fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.