1 Way wet room shower tray 800 x 800 x 30 mm Linear End 600 mm Flexi Black Dual

£779.50
Tax included

The smallest square-shaped tray we provide measures 800 x 800 mm. It enables you to craft a sophisticated shower, ideal even for compact bathrooms. Not only does it present a pleasing appearance, but it also ensures effortless, barrier-free entry.

Each Tray's Advanced 3 piece drain offers plenty of flexibility and safety as well. The integrated plastic channel is factory installed into the tray assuring a water tight seal and allowing for the waste trap to be connected anywhere along the channel. The 304 grade stainless steel frame and cover make up the remaining parts of the drain. They are available in a variety of PVD coated colours and finishes. The frame is height adjustable to match the finished floor height. It also offers secondary drainage in case water were to ever penetrate the floor covering it will find its way to the drain. The cover itself is reversible, allowing you to either leave it right side up for a stainless steel finish to the cover or flipping it over and tiling inside for a tiled finish.

These XPS foam Trays have a One-Way single slope machine cut into with an estimated 1-2% fall. The bottom side of the tray is level and the integrated channel does not protrude below the tray allowing for both timber and concrete floor installation. Furthermore the hole (hole cutter provided) for the waste trap is drilled on site by the installer making avoiding joists that much simpler. Although the tray provides great thermal and acoustic insulation it is not structural so it will require to be supported throughout its entirety. The Trays are trim-able and can be cut down to a specific size or to avoid corners or match uneven walls or irregular angles.

Tray size:
Floor Finish
Drain Cover
  • Black Reversible (Tileable / Solid)
Drain position
  • End
Slope
Waterproofing kit
Underfloor heat mat
Shower screen
Quantity
Product Code TLFO8836EDBL
Check availability & delivery time

TLFO8836EDBL
Dallmer Waste Trap
Dallmer SOLOS BS 2'' shower trap is included with our Flexi Shower Base. It featuers ball joint connector adjustable by 15 degrees. For more information and technical drawing please see Attachments tab above.

  • Height: 105 mm
  • Width: 85 mm
  • Outlet : 50 mm
  • Material: polypropylene, ABS
  • Standard: DIN EN 274
Parts Included
Parts included with every Wetroomstop Flexi Shower Base:
  • Sturdy XPS board
  • Integrated linear drain
  • Reversible drain cover (tilable/plain)
  • Dallmer shower trap
  • Hole cutter kit
  • (optional, highly recommended) Wetroomstop Waterproofing Kit
Hole Cutter Kit
With every Shower Base we supply special hole cutting kit to easily cut a hole in the drain wherever you want to fit the shower trap between floor joints or pipes.
Parts Included
We highly recommend to include a waterproofing kit for every tray installation. 
When buying our Shower Base and choosing to include a waterproofing kit you will also receive a special bucket with all the sealing materials that you will need. With this kit you will be able to insulate and waterproof all your shower area and prepare it for tiling.

Contents:
  • 4 kg of PCI Lastogum liquid foil
  • 1l of primer
  • 2 sealing internal corners
  • 2 sealing cuffs 10 x 10 cm
  • 10 m of sealing tape
    Can I Fit A Wet Room Tray Myself?

    How Much Do Wet Rooms Cost?

    Are Wet Rooms More Expensive Than Traditional Bathrooms?

    Will A Wet Room Add Value To My Home?

    How Easy Is It To Clean A Wet Room?

    Do Wet Rooms Require Much Maintenance?

    Can I Install Underfloor Heating in a Wet Room?

    Are There Any Common Problems With Wet Rooms?

    How Do You Dry Out A Wet Room?

    How Do You Stop A Wet Room From Flooding?

    Why Is My Wetroom Not Draining?

    What Fall Should A Wetroom Floor Have?

    How To Unblock A Wet Room Drain?

    How Long Does It Take To Install A Wet Room?

    Do Wet Rooms Get Mouldy?

    How To Clean Grout Out Of A Wetroom Floor?

    What Type Of Drain Is Best For A Wet Room?

    How Do Linear Drains Work?

    How To Clean Linear Drains?

    Do I Need To Maintain Linear Drains?

    Do Linear Drains Ever Clog?

    Can I Install Linear Drains In A Concrete Floor?

    Can I Install Linear Drains In A Wooden Floor?

    Can I Install A Linear Drain With Tiled Showers?

    Does A Linear Drain Have To Go Wall-To-Wall?

    How Often Do I Need To Clean A Linear Drain?

    Why have a curbless shower?

    Where does the linear drain go in a curbless shower?

    What Are Wet Room Floors Made Of?

    Can You Use Lino In A Wetroom?

    What Kinds Of Tiles Are Best For Wet Rooms?

    Can I Cover A Wet Room Floor?

    What Flooring Is Best For A Wet Room?

    How Do You Slope A Wetroom Floor?

    How Much To Install A Wet Room Floor?

    What Is The Best Way Of Cleaning A Wet Room Floor?

    How To Use Jointing Tape?

    What's The Difference Between Tanking Tape & Normal Tape?

    How To Correctly lay down Tanking Tape?

    Does Waterproof Tape Actually Work?

    How Do You Seal A Wetroom Floor?

    How Do You Waterproof A Wet Room?

    Are Wet Rooms Disability-Friendly?

    Are Wet Rooms Suitable For The Elderly?

    Can I Get A Wet Room With A Seat?

    Can I Use A Wheelchair In A Wetroom?

    Are Wet Rooms Dangerous?

    Can I Get A Grant To Fit A Wet Room?

    What Is A Wetroom Tray?

    How Do You Raise A Shower Tray?

    What Sizes Do Shower Trays Come In?

    How Much Does A Shower Tray Cost?

    Do you sell the waterproof liquid separately. If so how much would 5 litres cost?

    No we do not currently sell the waterproofing liquid separately. You can purchase an additional tanking kit if you wish. It comes with 4 kg of lastogum, 1L of primer, 10m of sealing tape, 2 internal corners, and 2 pipe collars


    I have a 1300x700 area which I want to fit a wet room shower tray. Am I able to buy a 1400x900 off yourselves and cut to fit?

    Hello Luke,

    Thank you for your message.

    I can confirm that our trays are trimmable and there are several options for your 1300 x 700 shower area. 

    We can manufacture a bespoke tray to match that size exactly. It would take about 10 days and would have higher price but it wouldn't need any extra materials or effort,

    • 900 x 1400 tray with central drain, so you can cut it down to size symmetrically,
    • 800 x 1200 tray, cutting down to size the 800 mm dimension and extending 1200 to 1300 using tile backer boards, which are made of similar material to what the tray is made of.
    • If you can afford waiting, in my opinion it would be the best idea to go for a custom size wet room tray. 

    In case of any other questions I will be happy to assist. 

    Kind regards

    Chris 020 8145 4804


    Were do u install both pipe collars that are provided in tanking kit?

    The pipe collars provided with our tanking kits are to be used if you have water pipes sticking out of the wall for your shower valve. They are optional and only need to be used if required.


No reviews

13 other products in the same category:

×

We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies. For more information, please visit our Privacy Policy.

Close Customise Accept