• -40%

Wetroomstop Quadra Central Shower Base 800mm x 800mm x 20mm FastFlow Dallmer

6 Reviews
£167.76 Save 40%
£279.60
Tax included

The 800 mm x 800 mm shower base is 20 mm thick before tiling. Designed for level access showers without a step up. The shower base is produced from XPS foam and covered on both sides by a cementous coating and a reinforcing net. This surface is ready to tile onto. It's light yet flexible enough to absorb movement within the structural floor. 

The shower base comes with a pre-made fall from each corner to the drain thus helping the tiler. XPS foam has great acoustic properties and therefore is especially useful in the UK when you can generally here what's going on upstairs! It can be easily cut if necessary, say around pipes or other obstacles. The height off the drain is 10mm, however this can be extended to 17mm using the adaptor provided   

Tray size:
Tanking kit
Drain Cover
Waste Trap

The 150 mm x 150 mm Dallmer gulley is positioned in the centre and is really easy to install. The K frame is factory fitted on the surface of the shower base and a stainless steel plate is factory fitted to the underside of the shower base to provide a perfect surface for the trap sealing ring to connect to. It comes complete with a standard stainless steel cover and a 5 mm solid stainless steel cover upgrade is available. If you are using thicker tiles an add-on frame adjuster is included. The outlet pipe is ABS and therefore can be solvent welded to provide a great connection.   

Data sheet

Size
800mm x 800mm
Thickness
20mm
Drain position
Centre
Channel length
600mm
Material
XPS Foam Sheet
Reinforcement
Fibre glass mesh & cementous glue.
Fall
4-way 2% towards the drain
Additionals
Tanking kit
Drain surface
brush
Cleaning
From above (Easy clean system)
Model
Line
Set consists
Wet room tray · integrated linear drain body · drain grating · siphon trap

Specific References

EAN13
5901797296575
6 Reviews

unique
GOOD PRODUCT really happy with it only recommend
on

ok
no problems
on

OK
Good seller and product
on

Really fast
Quick transaction, prompt and efficient service, great price.
on

great
great value :)
on

Thank you
It's a very nice shower base! Thank you for fast delivery and high quality!
on
Parts included
When buying our Shower Base you will also receive a special bucket with a Waterproofing Kit. With this kit you will be able to insulate and waterproof all your shower area and prepare it for tiling.

Contents:
  • 4 kg of PCI Lastogum liquid foil
  • 1l of primer
  • 2 sealing internal corners
  • 2 sealing cuffs 10 x 10 cm
  • 10 m of sealing tape
Dallmer waste trap
Dallmer type 48 KE shower trap is included with our Shower Base. It featuers ball joint connector adjustable by 15 degrees. For more information and technical drawing please see Attachments tab above.

  • Top size: 150 x 150 mm
  • Frame size: 143 x 143 mm
  • Height: 105 mm
  • Width: 85 mm
  • Outlet : 50 mm
  • Base material: ABS
  • Base material: 304 stainless steel
  • Standard: DIN EN 1519
You can choose which grating you want with your Shower Base tray. We offer three different patterns to suit your needs.

STANDARD
This grating is stamp formed from thin stainless steel and features default well known stripes design.

CIRCLES
This grating is laser cut from thick piece of premium stainless steel and features circles design.

STRIPES
This grating is also laser cut from thick piece of premium stainless steel and features stripes design

Dallmer waste trap

Parts included
Parts included with every Wetroomstop Dot Shower Base:
  • Sturdy XPS board
  • Integrated square drain
  • Drain cover
  • Dallmer shower trap
  • Wetroomstop Waterproofing Kit

You might also like

16 other products in the same category: